Weserhütte Universalseilbagger / Rammführung / Bohrgerät paalutuskone

Universal cable excavator / pile driver / drilling rig
Serial number: 191222
Year of construction: 1994 (complete documentation available)
Operating hours: ~15,000 h (complete service history available)
Maximum hook height: approx. 41,000 mm
Engine: Caterpillar Diesel D 3406 DI-T 6-cylinder water-cooled
Power: 250/335 kW/hp (2,100 rpm)
Diesel tank: 610 l
Oil tank: 390 l (bio-oil)
Weight: approx. 80,000 kg
Total boom length: 43,000 mm
Max. Load capacity of 5,100 kg at an outreach of 16,000 mm
Max. Load capacity of 440 kg at a radius of 38,000 mm
Trolley length: 5,270 mm
Track width: 1,000 mm / Trolleys can be extended hydraulically
(transport position <> working position)

Main features
Two winch drive variants
1. mechanical winch drive with high efficiency for diaphragm
wall grab, drill grab and drill bit use, dragline bucket use, etc.
2. hydrostatic winch drive
- switchable at any time
- infinitely variable
- and for force-locked load lowering
3. reinforced main winches with large-dimensioned disk clutches and external hand brakes

Dimensions of ready-to-use appliance: (upper carriage only)
Width: 4,600 mm
Length: 6,975 mm
Height: 5,870 mm

Transport dimensions:
Width: 3,700 mm
Length: 7,765 mm
Height: 3,510 mm

Device completely overhauled!

Condition of undercarriage:
Drive/chain/rollers/drives: 80-90%

The universal fully hydraulic pile driver RW200
Technical data for the RW200 leader
• Fully hydraulic leader adjustment
to the front 1 : 3
to the rear 1 : 3.7 - alternatively 1 : 1 (45°)
laterally 1 : 18
• Leader length: 22,000 mm with boom length of 14,500 mm
• Pile length up to 17,000 mm
• Additional counterweight: 3,900 kg
• Max. 9,600 kp is permissible in the highest position for pile driver +
impact hood without pile in place

The following applications can be carried out with the universal duty cycle crawler crane:
• Drag shovel operation
• Crane operation/grab operation
• Use with free rider (pile-driving operation)
• Use with Mäkler RW200 pile driver (included in the scope of delivery; diesel hammer available on request)
• Use in drilling mode with drilling guide and drilling table (drilling table holder with additional hydraulics available)
• Use with auger

Can also be extended to large bores with drill guide/drill table (drill table holder and additional hydraulics available):

The device also has support rams and holders for an additional hydraulic pack (required for use with large vibrators that require extra hydraulic oil)

Included in the scope of delivery:

Lattice boom complete with hammer head: (total boom length: 43,000 mm

Max hook height: approx. 41,000 mm 3x intermediate piece á 6,000 mm
Basic boom: 4,000 mm 2x intermediate piece á 3,000 mm
Reducer: 3,000 mm 1x extra intermediate piece 6,000 mm
1x intermediate piece: 12,000 mm 1x upper section (hammer head) 9,300 mm
2x upper section (hammer head) 8,300 mm

Maximum load capacity of 5,100 kg with an outreach of 16,000 mm
Maximum load capacity of 440 kg with an reach of 38,000 mm


Tool holder for leader operation