Wire processing machine muu metallintyöstökone

Preis: Contact us for price
Marke: Wire processing machine
Wire processing machine (From a Plant for fire aluminizing steel wire)
Wire coils with a maximum wire weight of 900 kg can be unwound on the wire unwinding unit. The exact specifications regarding wire strength and spool dimensions can be found in the manufacturer's technical documentation
The wire coils are wound onto hard paper cores or one-piece steel spools in the delivery state. If the wire coils are not wound on one-piece steel spools
they must first be clamped in separable spools The process is described in Chapter IV
page Maintenance - Set-up work The spools are clamped on the unwinding shaft of the winder between 2 conical discs with a threaded nut
The process is carried out manually The details are described in Chapter II
B.02 The tensioned wire coils are unwound with a preselected retraction. A total of 12 wires can be unwound simultaneously
the unwinding device consists of 12 individual unwinders. The unwinding operation is discontinuous Start with wire start
stop with wire end
all 12 spools must always be stopped simultaneously
it is not possible to stop a single wire while the remaining wires continue to run
Risk of the wire burning out during induction heating. The wire end of the spool is welded to the wire start of the following spool
description in chapter II
B 01
page .... The unwinding tension is controlled via bending dancer rollers. The retraction tension of the dancer rollers is controlled by air pressure
The unwinding tension is set depending on the wire thickness
the wire strength and the winding condition of the wire coils. Furthermore
possible torsion in the coil winding must be taken into account
The specific retraction must not exceed 20 N/mm²
With a wire diameter of 2.00 mm
this means a maximum pressure setting of 4 bar at the pressure reducing valve
Find more here
näytä yhteystiedot
Contact us at
näytä yhteystiedot