ERFURT RDOH 2-400 metalli prässi

without Coil line
zig-zag feed
2-axis transfer unit
Press force monitoring BRANKAMP
cushion mounting bar in table with exchangeable pneumatic cushion units
MAYFRAN scrap conveyor (cross conveyor)
optional (separate offer):
MAYFRAN longitudinal conveyor and scrap loading station with swiveling outlet.
Condition:
Machine serviced annually, good overall condition.
next safety check 11/2024


Press Design
drive system: eccentric / crank
frame design: H-frame, monoblock
openings in uprights: yes
number of suspensions: 2
number of slide actions: 1
table cushion: yes
quick die change system: yes
feedstock transport direction: left to right
Press forces
total force (nominal): 400 to
nominal work capacity: 32 kNm
Press Table
table surface (left-right): 2600 mm
table surface (front-back): 990 mm
thickness of bolster plate: 200 mm
height above floor level: 800 mm
opening in bed (left-right): 2250 mm
opening in bed (front-back): 280 mm
Slide
slide force: 400 to
table surface (left-right): 2600 mm
table surface (front-back): 990 mm
stroke: 210 mm
stroke rate (max.): 90 /min
slide (mechan. Press)
slide adjustment: 150 mm
stroke rate (min.): 25 /min
stroke rate (max.): 90 /min
hydraulic overload protection: yes
main drive power: 72 kW
slide ejector / cushion
number of ejectors: 13
nominal force: 3.7 to
stroke: 89 mm
Tool Assembly Dimensions
shut height (stroke down, adjustment up), BDC: 705 mm
distance between columns (H-frame): 2900 mm
passline opening (free passage in side columns): 900 mm
free passage between side columns (height): 545 mm
Coil Chair
coil weight max.: 3 to
stroke: 550 mm
Decoiler
design: single reel, traversable
sheet width max.: 400 mm
sheet width (min): 30 mm
coil weight max.: 3 to
max. diameter of coil: 1500 mm
mandrel expansion range from: 460 mm
mandrel expansion range up to: 530 mm
Leveller Unit
sheet width max.: 400 mm
sheet thickness max.: 5 mm
sheet thickness min.: 0.5 mm
number of leveller rolls: 9
diameter of leveller rolls: 50 mm
number of infeed-/outfeed rolls: 2
diameter of feed rolls: 150 mm
loop controls: yes
Strip-Feeder
feeder type: roll feeder
roll diameter: 120 mm
pilot release system: yes
Transfer System
distance between tools, stroke X max.: 300 mm
distance between tools, stroke X min.: 90 mm
Inner width clamping rails closed max.: 340 mm
Electrical specifications
mains voltage: 400 V
mains frequency: 50 Hz
Dimensions / weights
height above floor level: 6300 mm
total weight approx.: 73000 kg